News
Ultrawide Monitors with Amer Monitor Mounts
Specs for almost all monitor mounts are based on an aspect ratio of 16:9 otherwise known as Widescreen which is pretty standard nowadays unless you have a bunch of older 4:3 monitors still lying around. For ULTRAWIDE monitors the aspect ratio is 21:9 so there is quite a difference in the physical specs of a monitor even if both say they have the same diagonal width. Without getting too mathematical with the Pythagorean theorem if we look at a 25 inch monitor a widescreen monitor from a popular manufacturer could have a width of 569 mm while an ultrawide has a width of 609 mm. This difference could cause difficulties without looking at the actual support dimensions of the mount to ensure that the Ultrawide will fit.
To try and create an easier reference for Ultrawide Monitor's, the support for 25" Ultrawide Monitors can be supported by the following mounts:
- AMR2S32
- AMR2C32
- AMR4S32
- AMR4C32
- AMR4P32
- AMR3S32
- AMR6S32
- AMR2SV
- AMR2CV
- AMR2S32V
- AMR2C32V
29" Ultrawide Monitors can be supported by the following mounts:
- AMR2S32
- AMR2C32
- AMR4S32
- AMR4C32
- AMR4P32
- AMR3S32
- AMR6S32
- AMR2S32V
- AMR2C32V
34" Ultrawide Monitors can be supported by the following mounts:
- AMR2S32V
- AMR2C32V